This was the first time in learning Motion capture as we where only able to do it for few hours , so I don't have lot of information but I am going to show what I did during that day .

We had 6 real time camera which where basically play station cameras and we hooked each of them on to 6 different tripod .

These are the real time cameras we used


One of the tripod was set a bit higher so that we could angel the solder

These cables where set with a long usb extension from the camera to the converter


after all the cables where set in the converter now this converted will be connected to the computer where we can view all the 6 cameras in a software called lps recorder

Here we trying to learn how to use the recording studio with a help of PDF we where told to read through form the Ravensbourne intranet


So we recorder a action in the center of all the caners which is called light dance to get calibrate points which will then lead to the ips studio where that light dance will be recorded into the scene and will take effect on the the motion capture area which is the distance and ground area


so no that our scene is calibrated we record a new action in the T-pose and then we continue with the what ever action we want , in this case we did a walk cycle

This are the setting me use to key frame the 3d to the live action , by matching all the 6 cameras in 1 single appropriate angle which dint not lead to any success , because half of the time we spend on learning the program and we realize that we need to learn a lot about the program before we go any further , but we ran out of time and we had to pack up by the time reached this stage . We where also told to book the room for this Friday and re take a short .